Space Shuttle Orbiters

114 books
Finite-element reentry heat-transfer analysis of space shuttle orbiterWilliam L. Ko
⏱ 56m

Finite-element reentry heat-transfer analysis of space shuttle orbiter

William L. Ko

198656 pp.
Space shuttle orbiter trimmed center-of-gravity extension studyWilliam I. Scallion

Space shuttle orbiter trimmed center-of-gravity extension study

William I. Scallion

1985No page data
Feasibility analysis of cislunar flight using the shuttle orbiterDavy A. Haynes

Feasibility analysis of cislunar flight using the shuttle orbiter

Davy A. Haynes

1991No page data
Measurements of plasma density and turbulence near the shuttle orbiterUnknown Author

Measurements of plasma density and turbulence near the shuttle orbiter

Unknown Author

1987No page data
Determination of shuttle orbiter center of gravity from flight measurementsE. W. Hinson

Determination of shuttle orbiter center of gravity from flight measurements

E. W. Hinson

1991No page data
Experimental and computational analysis of shuttle orbiter hypersonic trim anomalyGregory J. Brauckmann

Experimental and computational analysis of shuttle orbiter hypersonic trim anomaly

Gregory J. Brauckmann

1995No page data
Analysis of the space shuttle orbiter skin panels under simulated hydrodynamic loadsHuey D. Carden
⏱ 12m

Analysis of the space shuttle orbiter skin panels under simulated hydrodynamic loads

Huey D. Carden

198812 pp.
A model for Space Shuttle orbiter tire side forces based on NASA Landing Systems Research Aircraft test resultsCarter, John F.

A model for Space Shuttle orbiter tire side forces based on NASA Landing Systems Research Aircraft test results

Carter, John F.

1997No page data
Inviscid flow computations of the shuttle orbiter for Mach 10 and 15 and angle of attack 40 to 60 degreesRamadas K. Prabhu

Inviscid flow computations of the shuttle orbiter for Mach 10 and 15 and angle of attack 40 to 60 degrees

Ramadas K. Prabhu

2001No page data
Pressure distributions obtained on a 0.10-scale model of the space shuttle orbiter's forebody in the AEDC 16T propulsion wind tunnelPaul M. Siemers

Pressure distributions obtained on a 0.10-scale model of the space shuttle orbiter's forebody in the AEDC 16T propulsion wind tunnel

Paul M. Siemers

1986No page data
An axisymmetric analog two-layer convective heating procedure with application to the evaluation of space shuttle orbiter wing leading edge and windeward surface heatingK. C. Wang

An axisymmetric analog two-layer convective heating procedure with application to the evaluation of space shuttle orbiter wing leading edge and windeward surface heating

K. C. Wang

1994No page data
Final report for ETP-0492, measured residual stresses in CYL S/N 53 fretted areaRonald L. Webster

Final report for ETP-0492, measured residual stresses in CYL S/N 53 fretted area

Ronald L. Webster

1998No page data
STS-60 space shuttle mission reportRobert W. Fricke

STS-60 space shuttle mission report

Robert W. Fricke

1994No page data
STS-67 space shuttle mission reportRobert W. Fricke

STS-67 space shuttle mission report

Robert W. Fricke

1995No page data
In-flight investigation of shuttle tile pressure orifice installationsTimothy R. Moes
⏱ 33m

In-flight investigation of shuttle tile pressure orifice installations

Timothy R. Moes

199033 pp.
Shuttle fleet operationsDavid Leinweber
⏱ 55m

Shuttle fleet operations

David Leinweber

198455 pp.
Turnaround operations analysis for OTVGeneral Dynamics Corporation. Advanced Space Programs.

Turnaround operations analysis for OTV

General Dynamics Corporation. Advanced Space Programs.

1988No page data
STS-77 space shuttle mission reportRobert W. Fricke

STS-77 space shuttle mission report

Robert W. Fricke

1996No page data
STS-39 space shuttle mission reportRobert W. Fricke

STS-39 space shuttle mission report

Robert W. Fricke

1991No page data
In-orbit calibration of a SAMS triaxial sensor headLouis S. Chestney

In-orbit calibration of a SAMS triaxial sensor head

Louis S. Chestney

1996No page data
Page 1 of 6Next →