Laminates

779 books
Engineering laminatesAlbert G. H. Dietz
⏱ 13h 17m

Engineering laminates

Albert G. H. Dietz

1949797 pp.
[Out of plane gradients in laminated composites]Carl T. Herakovich

[Out of plane gradients in laminated composites]

Carl T. Herakovich

1994No page data
Hole interaction and load introduction effects for compression-loaded laminates with holesMark J Shuart

Hole interaction and load introduction effects for compression-loaded laminates with holes

Mark J Shuart

1984No page data
Mechanical and thermal buckling analysis of sandwich panels under different edge conditionsWilliam L. Ko

Mechanical and thermal buckling analysis of sandwich panels under different edge conditions

William L. Ko

1993No page data
Damage growth in composite laminates with interleavesJ. G. Goree

Damage growth in composite laminates with interleaves

J. G. Goree

1987No page data
Delaminations in composite plates caused by non-penetrating impactScott R. Finn

Delaminations in composite plates caused by non-penetrating impact

Scott R. Finn

1989No page data
Simulated impact damage in a thick graphite/epoxy laminate using spherical indentersC. C. Poe

Simulated impact damage in a thick graphite/epoxy laminate using spherical indenters

C. C. Poe

1988No page data
Postbuckling of laminated anisotropic panelsGlenda L. Jeffrey

Postbuckling of laminated anisotropic panels

Glenda L. Jeffrey

1988No page data
Economic feasibility of process for high-yield laminated structural productsGeorge B. Harpole
⏱ 22m

Economic feasibility of process for high-yield laminated structural products

George B. Harpole

197722 pp.
Compression of thick laminated composite beams with intitial impact-like damageN. L. Breivik

Compression of thick laminated composite beams with intitial impact-like damage

N. L. Breivik

1992No page data
Compression behavior of delaminated composite platesScott O. Peck

Compression behavior of delaminated composite plates

Scott O. Peck

1989No page data
Production of laminated veneer lumber using high frequency heating in the pressing operationTodd William Bodenheimer
⏱ 53m

Production of laminated veneer lumber using high frequency heating in the pressing operation

Todd William Bodenheimer

199253 pp.
Strain energy release rates of composite interlaminar end-notch and mixed mode fractureRamakrishna Rao Valisetty

Strain energy release rates of composite interlaminar end-notch and mixed mode fracture

Ramakrishna Rao Valisetty

1987No page data
A study of the mechanical behavior of a 2-D carbon-carbon compositeWilliam.B Avery

A study of the mechanical behavior of a 2-D carbon-carbon composite

William.B Avery

1988No page data
Effects of partial interlaminar bonding on impact resistance and loaded hole behavior of graphite/epoxy quasi-isotropic laminatesWalter Illg

Effects of partial interlaminar bonding on impact resistance and loaded hole behavior of graphite/epoxy quasi-isotropic laminates

Walter Illg

1986No page data
Laminated plasticsD. J. Duffin
⏱ 4h 9m

Laminated plastics

D. J. Duffin

1966249 pp.
Micromechanics of composite laminate compression failuresEunice Gail Guynn

Micromechanics of composite laminate compression failures

Eunice Gail Guynn

1988No page data
Buckling analysis of laminated thin shells in a hot environmentPascal K. Gotsis

Buckling analysis of laminated thin shells in a hot environment

Pascal K. Gotsis

1993No page data
Feasibility study on the development of tough, moisture-resistant laminating resinsR. A Brand
⏱ 22m

Feasibility study on the development of tough, moisture-resistant laminating resins

R. A Brand

197922 pp.
Composite space antenna structuresCarol A. Ginty

Composite space antenna structures

Carol A. Ginty

1987No page data
← PreviousPage 5 of 39Next →