Substitution of bituminous roadbase for granular sub-base
M. E. Nunn
Reading Time
at 250 WPM11 minutes
The average reader, reading at a speed of 250 WPM, would take 11 minutes to read Substitution of bituminous roadbase for granular sub-base.
Personalise your estimate by entering your reading speed below
Test my reading speedEnter speed in words per minute
1
day at 30 min/day
11
total minutes
Substitution of bituminous roadbase for granular sub-base
by M. E. Nunn
Published
1986
Publisher
Transport and Road Research Laboratory
Pages
11
Bituminous materials in road construction
Evaluation of SA-1 process for reduction of hydrocarbon usage in bituminous pavement construction
The preparation of cutback bitumens to ASTM specifications by blending readily available constituents
Stichwort Strassenbau (bit)
An assessment of bituminous basecourse and roadbase materials containing EVA and sulphur
Assessing the performance of bituminous pavements
Frequently Asked Questions
How many pages are in Substitution of bituminous roadbase for granular sub-base?
This edition of Substitution of bituminous roadbase for granular sub-base has approximately 11 pages. Please note, this is an estimate and the exact page count can vary between hardcover, paperback, and e-book versions.
How long does it take to read Substitution of bituminous roadbase for granular sub-base?
For most readers, Substitution of bituminous roadbase for granular sub-base typically takes between 14m and 9m to complete. This is based on the book's length of approximately 2,750 words and common reading speeds.
Here's a detailed breakdown: • Continuous reading at 250 WPM: approximately 11m of focused reading • Casual reading (30 minutes/day): you could finish in roughly 1 day • Estimated word count: 2,750 words
Your individual reading time will vary based on your personal reading pace, the amount of daily reading time, and your familiarity with the subject matter.
What is the word count of Substitution of bituminous roadbase for granular sub-base?
The estimated word count for Substitution of bituminous roadbase for granular sub-base is approximately 2,750 words. This figure is calculated using industry-standard methods that consider genre-specific word density patterns, typical formatting and layout characteristics, and standard words-per-page ratios for published books.
This is an approximation — actual word count may vary based on font size, formatting, edition, and the presence of illustrations or charts.
Who is the author of Substitution of bituminous roadbase for granular sub-base?
Substitution of bituminous roadbase for granular sub-base was written by M. E. Nunn.
When was Substitution of bituminous roadbase for granular sub-base published?
The publication date for this specific edition is 1986. The original work may have been published on a different date.