Standardization in Smart Grids
Mathias Uslar
Reading Time
at 250 WPM4h 42m
The average reader, reading at a speed of 250 WPM, would take 4h 42m to read Standardization in Smart Grids.
Personalise your estimate by entering your reading speed below
Test my reading speedEnter speed in words per minute
10
days at 30 min/day
282
total minutes
Standardization in Smart Grids
Published
Dec 14, 2012
Publisher
Springer
Pages
282
ISBN-13
9783642349171
ISBN-10
364234917X
Description
<p>Besides the regulatory and market aspects, the technical level dealing with the knowledge from multiple disciplines and the aspects of technical system integration to achieve interoperability and integration has been a strong focus in the Smart Grid. This topic is typically covered by the means of using (technical) standards for processes, data models, functions and communication links. Standardization is a key issue for Smart Grids due to the involvement of many different sectors along the value chain from the generation to the appliances. The scope of Smart Grid is broad, therefore, the standards landscape is unfortunately very large and complex. This is why the three European Standards Organizations ETSI, CEN and CENELEC created a so called Joint Working Group (JWG). This was the first harmonized effort in Europe to bring together the needed disciplines and experts delivering the final report in May 2011.^ After this approach proved useful, the Commission used the Mandate M/490: Standardization Mandate to European Standardization Organizations (ESOs) to support European Smart Grid deployment. The focal point addressing the ESO’s response to M/490 will be the CEN, CENELEC and ETSI Smart Grids Coordination Group (SG-CG). Based on this mandate, meaningful standardization of architectures, use cases, communication technologies, data models and security standards takes place in the four existing working groups. </p><p> </p><p>This book provides an overview on the various building blocks and standards identified as the most prominent ones by the JWG report as well as by the first set of standards group - IEC 61850 and CIM, IEC PAS 62559 for documenting Smart Grid use cases, security requirements from the SGIS groups and an introduction on how to apply the Smart Grid Architecture Model SGAM for utilities.^ In addition, future standards from ENTSO-E for market communications, standards for electric vehicles and future industrial automation, OPC UA are introduced. </p>
Subjects
Control of Electrical Drives
Electric Power System Planning
EMV
Projektierung von Automatisierungsanlagen
Drehstrommaschinen im Inselbetrieb
Elektrische Antriebstechnik
Frequently Asked Questions
How many pages are in Standardization in Smart Grids?
This edition of Standardization in Smart Grids has approximately 282 pages. Please note, this is an estimate and the exact page count can vary between hardcover, paperback, and e-book versions.
How long does it take to read Standardization in Smart Grids?
For most readers, Standardization in Smart Grids typically takes between 5h 53m and 3h 55m to complete. This is based on the book's length of approximately 70,500 words and common reading speeds.
Here's a detailed breakdown: • Continuous reading at 250 WPM: approximately 4h 42m of focused reading • Casual reading (30 minutes/day): you could finish in roughly 10 days • Estimated word count: 70,500 words
Your individual reading time will vary based on your personal reading pace, the amount of daily reading time, and your familiarity with the subject matter.
What is the word count of Standardization in Smart Grids?
The estimated word count for Standardization in Smart Grids is approximately 70,500 words. This figure is calculated using industry-standard methods that consider genre-specific word density patterns, typical formatting and layout characteristics, and standard words-per-page ratios for published books.
This is an approximation — actual word count may vary based on font size, formatting, edition, and the presence of illustrations or charts.
Who is the author of Standardization in Smart Grids?
Standardization in Smart Grids was written by Mathias Uslar.
When was Standardization in Smart Grids published?
The publication date for this specific edition is Dec 14, 2012. The original work may have been published on a different date.