Inlet spillage drag tests and numerical flow-field analysis at subsonic and transonic speeds of a 1/8-scale, two-dimensional, external-compression, variable-geometry supersonic inlet configuration
Joseph E. Hawkins
Reading Time
at 250 WPM1h 46m
The average reader, reading at a speed of 250 WPM, would take 1h 46m to read Inlet spillage drag tests and numerical flow-field analysis at subsonic and transonic speeds of a 1/8-scale, two-dimensional, external-compression, variable-geometry supersonic inlet configuration.
Personalise your estimate by entering your reading speed below
Test my reading speedEnter speed in words per minute
4
days at 30 min/day
106
total minutes
Inlet spillage drag tests and numerical flow-field analysis at subsonic and transonic speeds of a 1/8-scale, two-dimensional, external-compression, variable-geometry supersonic inlet configuration
Published
1976
Publisher
U.S. National Aeronautics and Space Administration
Pages
106
Practical intake aerodynamic design
Turbojet-exhaust-nozzle secondary-airflow pumping as an exit control of an inlet-stability bypass system for a Mach 2.5 axisymmetric mixed-compression inlet
Inlet flow characteristics during rapid maneuvers for an F/A-18A airplane
Low-speed aerodynamic test of an axisymmetric supersonic inlet with variable cowl slot
An experimental investigation of the flow through inclined circular tubes at a mach number of 4.0
Air intake problems in supersonic propulsion
Frequently Asked Questions
How many pages are in Inlet spillage drag tests and numerical flow-field analysis at subsonic and transonic speeds of a 1/8-scale, two-dimensional, external-compression, variable-geometry supersonic inlet configuration?
This edition of Inlet spillage drag tests and numerical flow-field analysis at subsonic and transonic speeds of a 1/8-scale, two-dimensional, external-compression, variable-geometry supersonic inlet configuration has approximately 106 pages. Please note, this is an estimate and the exact page count can vary between hardcover, paperback, and e-book versions.
How long does it take to read Inlet spillage drag tests and numerical flow-field analysis at subsonic and transonic speeds of a 1/8-scale, two-dimensional, external-compression, variable-geometry supersonic inlet configuration?
For most readers, Inlet spillage drag tests and numerical flow-field analysis at subsonic and transonic speeds of a 1/8-scale, two-dimensional, external-compression, variable-geometry supersonic inlet configuration typically takes between 2h 13m and 1h 28m to complete. This is based on the book's length of approximately 26,500 words and common reading speeds.
Here's a detailed breakdown: • Continuous reading at 250 WPM: approximately 1h 46m of focused reading • Casual reading (30 minutes/day): you could finish in roughly 4 days • Estimated word count: 26,500 words
Your individual reading time will vary based on your personal reading pace, the amount of daily reading time, and your familiarity with the subject matter.
What is the word count of Inlet spillage drag tests and numerical flow-field analysis at subsonic and transonic speeds of a 1/8-scale, two-dimensional, external-compression, variable-geometry supersonic inlet configuration?
The estimated word count for Inlet spillage drag tests and numerical flow-field analysis at subsonic and transonic speeds of a 1/8-scale, two-dimensional, external-compression, variable-geometry supersonic inlet configuration is approximately 26,500 words. This figure is calculated using industry-standard methods that consider genre-specific word density patterns, typical formatting and layout characteristics, and standard words-per-page ratios for published books.
This is an approximation — actual word count may vary based on font size, formatting, edition, and the presence of illustrations or charts.
Who is the author of Inlet spillage drag tests and numerical flow-field analysis at subsonic and transonic speeds of a 1/8-scale, two-dimensional, external-compression, variable-geometry supersonic inlet configuration?
Inlet spillage drag tests and numerical flow-field analysis at subsonic and transonic speeds of a 1/8-scale, two-dimensional, external-compression, variable-geometry supersonic inlet configuration was written by Joseph E. Hawkins.
When was Inlet spillage drag tests and numerical flow-field analysis at subsonic and transonic speeds of a 1/8-scale, two-dimensional, external-compression, variable-geometry supersonic inlet configuration published?
The publication date for this specific edition is 1976. The original work may have been published on a different date.