Electrical spray modification with various fuels in a T56 combuster
Avigdor Zajdman
Reading Time
at 250 WPM1h 1m
The average reader, reading at a speed of 250 WPM, would take 1h 1m to read Electrical spray modification with various fuels in a T56 combuster.
Personalise your estimate by entering your reading speed below
Test my reading speedEnter speed in words per minute
3
days at 30 min/day
61
total minutes
Electrical spray modification with various fuels in a T56 combuster
Published
1984
Publisher
Naval Postgraduate School
Pages
61
Description
The possibility of electrically altering the droplet size distribution and injection cone angle of gas turbine fuel injectors has been investigated. The work was carried out both in a combustor rig incorporating a T-56 combustor liner/nozzle and in a non-burning spray optical absorption apparatus into each of which a high voltage electrode could be introduced. Several electrode designs were investigated in an effort to minimize flameholding and subsequent electrical shot circuiting. Fuels investigated included JP-4, the design fuel, JET-A, JP-5, and Diesel Fuel Number 2. Results of the optical experiments indicated reductions in the Sauter Mean Diameter of 7.7 percent. Results of the combustion experiments indicated increases in combustor efficiency of up to 3.6 percent for Diesel Fuel Number 2 and increases up to 0.6 percent for JP-4. (Author)
Nuclear waste
Aircraft accident report
Air pollution
Ignition!
Tax administration
Current legal and institutional issues in the commercialization of phosphoric acid fuel cells
Frequently Asked Questions
How many pages are in Electrical spray modification with various fuels in a T56 combuster?
This edition of Electrical spray modification with various fuels in a T56 combuster has approximately 61 pages. Please note, this is an estimate and the exact page count can vary between hardcover, paperback, and e-book versions.
How long does it take to read Electrical spray modification with various fuels in a T56 combuster?
For most readers, Electrical spray modification with various fuels in a T56 combuster typically takes between 1h 16m and 51m to complete. This is based on the book's length of approximately 15,250 words and common reading speeds.
Here's a detailed breakdown: • Continuous reading at 250 WPM: approximately 1h 1m of focused reading • Casual reading (30 minutes/day): you could finish in roughly 3 days • Estimated word count: 15,250 words
Your individual reading time will vary based on your personal reading pace, the amount of daily reading time, and your familiarity with the subject matter.
What is the word count of Electrical spray modification with various fuels in a T56 combuster?
The estimated word count for Electrical spray modification with various fuels in a T56 combuster is approximately 15,250 words. This figure is calculated using industry-standard methods that consider genre-specific word density patterns, typical formatting and layout characteristics, and standard words-per-page ratios for published books.
This is an approximation — actual word count may vary based on font size, formatting, edition, and the presence of illustrations or charts.
Who is the author of Electrical spray modification with various fuels in a T56 combuster?
Electrical spray modification with various fuels in a T56 combuster was written by Avigdor Zajdman.
When was Electrical spray modification with various fuels in a T56 combuster published?
The publication date for this specific edition is 1984. The original work may have been published on a different date.