Acoustic Scanning Probe Microscopy
Francesco Marinello
Reading Time
at 250 WPM8h 42m
The average reader, reading at a speed of 250 WPM, would take 8h 42m to read Acoustic Scanning Probe Microscopy.
Personalise your estimate by entering your reading speed below
Test my reading speedEnter speed in words per minute
18
days at 30 min/day
522
total minutes
Acoustic Scanning Probe Microscopy
Published
Oct 04, 2012
Publisher
Springer
Pages
522
ISBN-13
9783642274954
ISBN-10
3642274951
Description
The combination of atomic force microscopy with ultrasonic methods allows the nearfield detection of acoustic signals. The nondestructive characterization and nanoscale quantitative mapping of surface adhesion and stiffness or friction is possible. The aim of this book is to provide a comprehensive review of different scanning probe acoustic techniques, including AFAM, UAFM, SNFUH, UFM, SMM and torsional tapping modes. Basic theoretical explanations are given to understand not only the probe dynamics but also the dynamics of tip surface contacts. Calibration and enhancement are discussed to better define the performance of the techniques, which are also compared with other classical techniques such as nanoindentation or surface acoustic wave. Different application fields are described, including biological surfaces, polymers and thin films.
Subjects
Frequently Asked Questions
How many pages are in Acoustic Scanning Probe Microscopy?
This edition of Acoustic Scanning Probe Microscopy has approximately 522 pages. Please note, this is an estimate and the exact page count can vary between hardcover, paperback, and e-book versions.
How long does it take to read Acoustic Scanning Probe Microscopy?
For most readers, Acoustic Scanning Probe Microscopy typically takes between 10h 53m and 7h 15m to complete. This is based on the book's length of approximately 130,500 words and common reading speeds.
Here's a detailed breakdown: • Continuous reading at 250 WPM: approximately 8h 42m of focused reading • Casual reading (30 minutes/day): you could finish in roughly 18 days • Estimated word count: 130,500 words
Your individual reading time will vary based on your personal reading pace, the amount of daily reading time, and your familiarity with the subject matter.
What is the word count of Acoustic Scanning Probe Microscopy?
The estimated word count for Acoustic Scanning Probe Microscopy is approximately 130,500 words. This figure is calculated using industry-standard methods that consider genre-specific word density patterns, typical formatting and layout characteristics, and standard words-per-page ratios for published books.
This is an approximation — actual word count may vary based on font size, formatting, edition, and the presence of illustrations or charts.
Who is the author of Acoustic Scanning Probe Microscopy?
Acoustic Scanning Probe Microscopy was written by Francesco Marinello.
When was Acoustic Scanning Probe Microscopy published?
The publication date for this specific edition is Oct 04, 2012. The original work may have been published on a different date.